There’s a few other tasks to finish off before I pull the body and start preparing the body for paint. One of the main tasks to finish off would be mounting the gas tank and cutting out the holes for the brake pedal and steering column and then rough mounting the Wanlass windshield to the roadster. All these will require some cutting and I’m just not looking forward to the fiberglass itch.
Once all the above is completed, I plan on building a jig to mount the body on so that I can roll it around. Then the fun starts, I get to start the running the brake/fuel lines and all the wiring. It’s going to be an exciting point in the build and I really enjoy doing that detail level of work. Of course, photos will be taken..
After the chassis is finished, then I will start the body work.. oh joy, the itch!